In NewCS there are no spaces, for instance :-
072A86FF
In CCcam you specify your reader first then your boxkey and it has a space after each byte, as an example :-
BOXKEY: /dev/sci0 07 2A 86 FF
Available Choices to apply the card.
Internal Dreambox Reader.
Smargo Smartreader+
Omnikey 3121
The program you must use varies a bit determined by the various readers choice.
Using the internal reader you’ve got the following choices to run the card.
CCcam 2.1.3 will run the card perfectly and will also up-date the entitlements without further intervention. Stories can be different regarding how warm the card becomes but there are not any reports whatsoever of any one burning up the card.
NewCS 1.67 RC1 will host the card really well. Nonetheless, when you use CCcam in order to connect for the NewCS server, it does not up-date the card. To be able to up-date the card you have to have one or more client connected working with MGCamd. Which can be the exact same box, or some other one.
Use the Smargo reader
CCcam 2.1.3 will run the card perfectly and it’ll update the entitlements without more intervention.
NewCS 1.67 RC1 will host the card really well. However, if you work with CCcam to connect in the NewCS server, it won’t update the card. For you to update the card you’ll want to have a minimum of one client connected using MGCamd. That could be the same box, or another one. Make sure you utilize the right binary file that has USB support when using the Smargo reader. In the event you install NewCS 1.67 from your VU+ addons panel, its likely the Omnikey reader will never work with that release. From the official NewCS release zip file, the file you’ll need for your Dreambox is called newcs.ppc.usb for enigma1 boxes or newcs.mips.usb for enigma2 boxes. You must set up this manually and rename it or edit any cam scripts to suite.
Work with the Omnikey Reader
NewCS would be the only available option whenever using this reader as CCcam won’t support PCSC type readers. NewCS 1.67 RC1 will host the card completely well. Having said that, if you use CCcam to connect into the NewCS server, it doesn’t update the card. As a way to update the card you must have at least one client connected using MGCamd. Which can be the identical box, or another one. Don’t forget to work with the correct binary file with which has PCSC support with the Omnikey reader. If you should install NewCS 1.67 through the Eaglebox HD addons panel, its very likely the Omnikey reader will not likely talk with that version. Via the official NewCS release zip file, the file you need for your Technomate is named newcs.ppc.pcsc for enigma1 receivers or newcs.mips.pcsc for enigma2 boxes. You must install this by hand and rename it or edit any cam scripts to suite. Lastly, be sure and install the PCSC drivers for your Technomate ahead of attempting to make use of an Omnikey reader. You will find a new article about toy dogs list with pictures on this very helpful internet site Serveur Cccam europe. This approach technique also will work into Cccam.
Mattie's Blog 